For a UTM Firewall we need to run four ports UTM only , for fiber port and Ethernet 10G ports is this available ?
In the standard appliances Ports on board are 1G, thus 10/100/1000.
NIP-52041 PCIe Gen2
PCIex4 - 4xFiber - Intel I350-AM4 - AI3-3454
Transceivers 1000Base SX and 10/100/1000Base T can have a multiple vendors, but all should work with our card.
We recommend the Finidar transceivers, but Cisco, HP, Dell and others should work fine as well.
End customer usually select transceivers, because they know what kind of switches are installed.
For fiber or high speed we support:
- 1x 10G copper with 2 ports that must use a Cat 6, Cat 6a, or Cat 7 cable. (spec suggesting to use CAT6a)
- 1x 10G fiber with 4 cages
Intel® Ethernet Controller XL710 based Fiber Network Interface Card with 4x SFP+ Ports and PCIe 3.0 x8 Interface
- Intel® Ethernet Controller XL710
- 4x fiber SFP+ ports
- Support PCIe Gen3 x8
- For fiber card cable and transceiver are not included